BEING CLEAN IS BEING SANITARY IN THE FERMENTATION INDUSTRIES

One of the greatest nightmares in the fermentation industries is the fear of microbial contamination outbreak. Such outbreaks will not only mean financial disasters due to the loss of product and costly fermentation media but also problems of disposing the contaminated fermentation media which are generally rich in nutrients and are very polluting. There is also the fear that the fermentation products not only resulted in decrease of volume and concentration but could be hazardous to human health! This might lead to liability cases which might run into millions of dollars! Its simply a lose – lose situation in microbial contamination strikes the fermentation plant!
Removing or reducing the number of unwanted microbes is a big issue. If you don’t remove the microorganisms it will affect the fermentation process. To make it even harder, all those residual nutrients could support the growth of the contaminating microorganisms. So the issue is not only removing the microbes but removing the remnant nutrients as well.
To clean and remove the offending microbes and nutrients we have to reach almost every surface, nook and cranny. This activity is not only restricted to the fermentor but all inlets leading to or from the fermentors. And this is not easy as it is difficult to reach those far reaching hidden places to effectively clean and sanitise the system. This problem is accentuated by poor design of the fermentation system which protects and even helps in the propagation of the contaminants.
We can look at the problem of fermentor sanitation from the point of:
1 Materials used for the fermentation system
2 Finishing of surfaces
3 Design of fermentation system
4 Sanitary fittings
The cleaning process is a harsh process in terms of the effect of the cleaning chemicals on the surfaces as well the effect of physical removal of dirt and slime from the fermentation surfaces. The materials used to build the fermentation system must be able to with stand the treatment.
Stainless steel is often the choice as not only its being inert and do not react with the cleaning chemicals but also with the fermentation process
The surface finish is of great importance. It is often said the smoother the surface the less chance for the contaminants to stick. This would make cleaning easier and efficient.
In reality if you look under microscope even the smoothest finishing is rough and provides refuge for the microbes to survive the cleaning surface. So even though smoother surface is better but it is not a guarantee.
What is more important is the cleanability or the ease of cleaning the surface for effective cleaning
The design of fermentor systems should not encourage the presence of inaccessible areas for microbes to survive and propagate. Dead legs or dead spaces should be eliminated or minimized. Threaded screws should be avoided as it could backfire in providing refuge instead of preventing the entry of microbes. Valves and pumps should be simple in design and easily disassembled for CIP procedures.
The cleaning of fermentation systems should be based more on the understanding of the behavior of the microbes and a more integrative holistic approach should help in maintaining sanitary conditions of fermentation system




Type rest of the post here.